filename: tfs 1643.doc version 3.0 08.07.2011 vectron international filter specification tfs 1643 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout measurement condition ambient temperature: 23 c input pow er level: 0 dbm terminating impedance: input: 50 ohm output: 50 ohm ch aracteristics remark: the max i mum attenuation in the passband is defined as the insertion loss a e . the nominal frequency f n is fix ed at 1643.5 mhz w i thout any tolerance or limit. the v a lues of absolute attenuation a abs are guaranteed for the w hole operating temperature range. the frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. d a t a ty p. v a lue tolerance / limit insertion loss a e 2 , 0 d b m a x . 3 , 5 d b nominal frequency f n - 1 6 4 3 , 5 m h z passband p b - f n 17,0 mhz passband v a riation 1 , 0 d b m a x . 2 , 0 d b a b solute attenuation a abs 1 m h z ? 1 5 2 5 m h z 3 0 db m i n . 2 5 d b 1 5 2 5 m h z ? 1 5 5 9 m h z 3 9 db m i n . 3 0 d b 1 5 5 9 m h z ? 1 6 0 6 , 5 m h z 1 6 db m i n . 1 0 d b 1 6 8 0 , 5 m h z ? 1 8 5 0 m h z 1 9 db m i n . 1 0 d b 1 8 5 0 m h z ? 2 1 1 0 m h z 3 8 db m i n . 3 0 d b 2 1 1 0 m h z ? 2 7 0 0 m h z 4 0 d b m i n . 2 0 d b return loss w i thin pb 1 4 d b m i n . 1 0 d b operating temperature range otr - - 40 c ... + 85c storage temperature range - - 40 c ... + 85c temperature coefficient of frequency t c f * -42 ppm/k *) ? f c (hz ) = tc f (ppm/k) x (t - t o ) x f cat (mhz ). ge ne ra te d: ch ecked / a p p r o v ed : notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1643.doc version 3.0 08.07.2011 vectron international filter specification tfs 1643 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout f ilter ch aracteristic 16 10 16 20 163 0 164 0 1650 1660 1 670 1 680 -12 -10 -8 -6 -4 -2 0 fr e q u e n c y i n m h z m a g n it u d e in d b 70 0 11 00 15 00 19 00 23 00 -60 -50 -40 -30 -20 -10 0 fr eq u e n c y i n mh z m a g n it u d e in d b cons truc tion a nd pin c onne c t ion 1 ground 2 input 3 ground 4 ground 5 output 6 ground date code: y ear + w eek b 2011 c 2012 d 2013 ... (all dimensions in mm) 1 2 3 4 5 6 1, 2 m a x . 0, 6 0, 7 5 3, 0 + / - 0 , 1 5 0, 6 0, 3 0 x 0 , 3 0 13 6 4 da t e c o d e h43 b28 50 ? t est circu i t l 1 sa w l 2 5 2 1, 3, 4, 6 notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1643.doc version 3.0 08.07.2011 vectron international filter specification tfs 1643 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g re spectively , 1 octave per min, 10 cy cles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions, see page 4: "air reflow temperature conditions" 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff di r e c t io n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 a o : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 8,4 + 1 ,5/-0 w 2 (max ) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2 the minimum bending radius is 45 mm. notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1643.doc version 3.0 08.07.2011 vectron international filter specification tfs 1643 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 1643.doc version 3.0 08.07.2011 vectron international filter specification tfs 1643 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout history version reason of changes name date 1.0 - generation of development specification noack 18.11.2010 2.0 - change stop band rejection noack 19.01.2011 - add ty pical values and filter characteristic - generation of filter specification 3.0 - limits for absolute attenuation changed molke 08.07.2011 (1559 ? 1606,5 mhz and 1680,5 ? 1850 mhz) - ty pical values and filter characteristic updated notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
|
